A gamma counter is an instrument to measure gamma radiation emitted by a radionuclide. Unlike , gamma counters are designed to measure small samples of radioactive material, typically with automated measurement and movement of multiple samples.
Operation
Gamma counters are usually scintillation counters. In a typical system, a number of samples are placed in sealed vials or test tubes, and moved along a track. One at a time, they move down inside a shielded detector, set to measure specific energy windows characteristic of the particular
isotope. Within this shielded detector there is a
scintillator that surrounds the radioactive sample. Gamma rays emitted from the radioactive sample interact with the crystal, are absorbed, and light is emitted. A detector, such as a photomultiplier tube converts the visible light to an electrical signal.
Depending on the
half-life and concentration of the sample, measurement times may vary from 0.02 minutes to several hours.
If the photon has too low of an energy level it will be absorbed into the scintillation crystal and never be detected. If the photon has too high of an energy level the photons may just pass right through the crystal without any interaction. Thus the thickness of the crystal is very important when sampling radioactive materials using the Gamma Counter.
Applications
Gamma counters are standard tools used in the research and development of new radioactive compounds used for diagnosing (and treating disease) as in PET scanning. Gamma counters are used in radiobinding assays,
[ Anti-dsDNA [I-125] Radiobinding Assay Kit At PerkinElmer Life Sciences, Inc. Retrieved Jan 2011] (RIA)
and
nuclear medicine measurements such as GFR
and
hematocrit.
Some gamma counters can be used for gamma spectroscopy to identify radioactive materials based on their output energy spectrum, e.g. as a wipe test counter.
